This data is being presented for informational purposes only. Care in reloading is a function of knowledge and skill. I suggest reading several reloading manuals before attempting reloading for the first time. I try to always consult at least 4 reloading manuals/sources before loading a cartridge for the first time. Top loads in any reloading data are just that, don't exceed. Always go with the recommended starting loads found in the manuals. With few exceptions my quest is for the load that provides: 1) top accuracy, 2) case life and 3) velocity. I consider them in that order. Sometimes I'm lucky and get all three. Loads in green are my current varmint load(s) for this caliber. Red lettering indicates a maximum load in this gun. .221 Fireball August 29, 2007 Tried the Nosler 50 grain BT in the XP100. Using Accurate 1680, Remington cases, Remington 7.5 primers I was able to fire sub inch groups with all loads. Top top loads of 1680 gave normal bolt lift, and primers with well rounded edges. Temps during testing were 90F+. March 8, 2006 with 40 grain loads using Accurate 1680. Top top loads of 1680 gave normal bolt lift, and primers with well rounded edges. Velocities were a real suprise for a 10.75 inch barrel. This should be a great powder for varmint loads in a rifle barrel.
I am always surprised at how accurate the XP100's are. I have shot woodchucks in excess of 200 yards with this one. Remington does not make the XP100 anymore. Above woodchuck was 155 yds distant. WARNING: Measurements below are for this gun only and are only shown for informational purposes. Measuring your own OAL is the only safe way to be sure you are not exceeding the maximum overall length in your gun.
|